Tape Decks Main
Return
Teac X-1000R

Black model pictured. Silver was standard.
Features/Specifications:
- Dual capstan, closed loop 3 motor transport (resulting in a phenomenally
low wow-and-flutter spec that is barely measurable at 0.03%)
- 6 heads (2 erase, 2 record, 2 playback)
- Auto-reverse (recording and playback both directions, when sensing foil
is used)
- dBx Type I noise reduction (increases s/n ratio from 65dB to 100dB – approaching
CD quality)
- Constant tension reel servos (for superbly stable tape handling)
- Electrical braking
- Punch-in recording
- Accommodates 10.5 inch, 7 inch, or smaller reels of 1/4 inch tape
- Two speeds (3-3/4 and 7-1/2 IPS)
- Frequency response of 30-34,000 Hz @7.5ips
- Three bias/equalization settings (LH-I, LH-II and EE).
Controls:
- Power switch
- Reel size (small or large)
- Speed switch
- Reverse mode switch (forward only, forward and back, continuous loop)
- Pitch control (± 5%)
- Tape lifter control (cueing)
- Auto spacer
- Dupli-sync
- Front panel mic inputs and headphone outputs
- dBx Type I noise reduction in/out switch
- Record mode switch
- Bias/eq settings
- Tape/source monitor switch
- Mic/line mixing level controls and output controls for each channel
- Large dual VU meters.
- Real-time electronic counter measures tape in minutes and seconds and includes
program, repeat, cue, search-to-cue, and search-to-zero functions.
Rear connections include line level inputs and outputs, dupli-sync, remote control, and power cord.
Site Design and Hosting by DanDLyin
Last modified
January 7, 2004