SPECIFICATIONS: 
Type: 	4-TRACK 2-CHANNEL STEREO/MONO. 
Max. REEL SIZE: 	7" 
MAX TAPE SPEED: 	19cm/sec. (7-1/2 ips}, 9,5cm/sec. (3-3/4 ips) 
TAPE SPEED ACCURACY: 	+ 0.5% AT 7-1/2ips and 3-3/4ips. 
HEADS: 
	ERASE 4-TRACK 2-CHANNEL
	RECORD 4-TRACK 2 CHANNEL. 
	FORWARD PLAYBACK 4-TRACK 2-CHANNEL
	REVERSE PLAYBACK 4-TRACK 2-CHANNEL
MOTORS: 
	ONE 4-POLE 2-SPEED HYSTERESIS SYNCHRONOUS MOTOR CAPSTAN DRIVE. 
	TWO 6-POLE CAPACITOR STARTING INDUCTION MOTORS FOR REEL DRIVE. 
FAST FORWARD/REWIND TIME: 	
	APPROX. 100 SEC. FOR 1,800-FOOT TAPE. 
WOW AND FLUTTER: 
	0.06% WRMS A 7 1/2ips
	0.1% WRMS AT 3 3/4ips. 
FREQUENCY RESPONSE: 
	15-25,000Hz (20-20,000Hz WITHIN =2db) AT 7 1/2ips.
	15-15,000Hz(30-10,000Hz WITHIN = 2db) AT 3 3/4ips.  
S/N RATIO: 	BETTER THAN 45dB BETWEEN CHANNELS AT 1,000hZ. 
DISTORTION FACTOR: 
	PLAYBACK PREAMP DISTORTION LESS THAN 0.1% (AT 1,000Hz AND OUTPUT OF 1.2V)/ 
	TAPE RECORD/PLAYBACK DISTORTION LESS THAN 1.2% (AT 1,000Hz AND 0 VU), LESS THAN 3% (AT 1,000Hz AND =6 VU) 
ERASING EFFICIENCY: 	BETTER THAN 60dB. 
INPUT SENSITIVITY AND IMPEDANCE: 
	MIKE: 0.5V MIN., 50K/ 0,05MV MIN., 600 (USING SANSUI A-603 MIKE TRANSFORMERS) 
	LINE-1, -2: 70V MIN., 100K 
	DIN: 14mV MIN., 
Output
	LINE, DIN: 1.2V MAX. (0 VU=0.775V,0 / VU= 0.225V SELECTABLE WITH SWITCH).  
	HEADPHONES: 10mW, 8 
BIAS FREQUENCY: 	100kHz.
MIXING: 	MIC+LINE-1 / LINE-1+LINE-2 / LINE-1 + DIN. 
SWITCHES: 
	OPERATING SWITCHES (REVERSE/REWIND/STOP/FAST FORWARD/FORWARD}, 
	PAUSE (OFF/ON/LOCK), 
	SLEEP (OFF/ON), 
	TAPE SPEED (7 1/2ips/3 3/4ips) (19cm/sec./9.5cm/SEC.)  
	TAPE TENSION (1 MIL/1/2 MIL), 
	RECORDING ,PDE (STEREO/MONO L+R), 
	MONITOR (SOURCE/PLAYBACK), 
	AUTOMATIC (AUTO REWIND/AUTO REVERSE/AUTO REPEAT/MANUAL). 
POWER REQUIREMENTS: 	100/110/120/200/220/240V AC, 50/60Hz 
POWER CONSUMPTION: 	130W 
DIMENSIONS: (17 1/8")WIDE X (21 1/8")HIGH.X ? Deep
Weight:	60 pounds