| Track System | 4-track, 2 channel stereo system |
| Reel Capacity | Up to 10-½ in. |
| Heads | Erase Head: (x2) Recording head: GX head (x2) Playback head: GX head (x2) |
| Motors | AC servo motor for capstan drive x1 AC Eddy current motors for reel drives x2 |
| Tape Speed | 19 cm/sec. ±0.8% (7-½ ips.) 9.5 cm/sec. ±1.0% ( 3-¾ ips.) Pitch control: more than ±6% |
| Wow & Flutter | Less than 0.03% WRMS, 0.07% DIN 45 500 at 19 cm/s Less than 0.04% WRMS, 0.09% DIN 45 500 at 9.5 cm/s |
| Tape Winding Time | 75 sec. using a 1200 ft. tape |
| Frequency Response (EE Tape) | 25 to 33,000 Hz
±3dB (-20 Vu) at 19 cm/s 25 to 26,000 Hz ±3dB (0 Vu) 25 to 25,000 Hz ±3dB (-20 Vu) at 9.5 cm/s 25 to 15,000 Hz ±3dB (0 Vu) |
| Signal to Noise Ratio | Better than 65dB at 19 cm/s (DIN 45 500) |
| Harmonic Distortion | Less than 0.4% at 19 cm/s |
| Input | MIC: 0.35 mV (input impedance 5.0 kohms.) Required Microphone Impedance: 600 ohms Line: 70 nV (input impedance 100 kohms) |
| Output | Line: 0.775V at 0 Vu Required Load Impedance: more than 20 kohms Phone: 1.3 mW/8 ohms at 0 Vu |
| DIN | Input: 2 mV (input Impedance 10 kohms) Output:0.3V Required Load Impedance: More than 20 kohms |
| Dimensions | Wide: 17.3” High: 19” Deep:10.1” |
| Weight | 46 lbs unpacked |
Last Modified 26 March, 2006