TRACK SYSTEM

4 Track 2 Channel Stereo System

REEL CAPACITY

Up to 10-1/2" reel

HEADS

Erase head x 1

GX recording head x 1

GX playback head x 1

MOTORS

AC servo motor for capstan drive x 1 AC eddy current motors for reel drive x 2

TAPE SPEED

19 cm/s± 0.8% (7-1/2 ips.) 9.5 cm/s± 1.0% (3-3/4 ips.) Pitch control: more than ± 6%

WOW & FLUTTER

Less than 0.03% WRMS, 0.08% DIN 45500 at 19 cm/s Less than 0.04% WRMS, 0.10% DIN 45500 at 9.5 cm/s

TAPE WINDING TIME

130 sec. using 740 m (2400 ft.) Tape

FREQUENCY RESPONSE

30 to 26000 Hz ± 3 dB at 19 cm/s 30 to 19000 Hz ± 3 dB at 9.5 cm/s

SIGNAL TO NOISE RATIO

Better than 62 dB at 19 cm/s DIN 45500 Better than 60 dB at 9.5 cm/s DIN 45500

HARMONIC DISTORTION

Less than 0.5%

INPUT

MIC: 0.25 mV (input impedance 2.4 kohms)

Required microphone impedance: 600 ohms Line: 70 mV (input impedance 100 kohms)

OUTPUT

Line: 775 mV at 0 VU

Required load impedance: more than 20 kohms Phone: 100 mV/8 ohms at 0 VU

DIN

Input: 2 mV (input impedance: 10 kohms) Output: 755 mV

Required load impedance: more than 20 kohms

DIMENSIONS

440 (W) x 446 (H) x 241 (D) mm (17.3 x 17.6 x 9.5")

WEIGHT

17.6 kg (38.9 lbs)

POWER REQUIREMENTS

100V 50/60 Hz for Japan

120V 60 Hz for US & Canada

220V/240V switchable, 50 Hz for European countries & Australia

110/120/220/240V 50/60 Hz, switchable for other countries

POWER CONSUMPTION

JPN 80 W CSA, AAL 150 W U/T 150 W