TRACK SYSTEM

4 track 2 channel stereo/monaural system

REEL CAPACITY

Up to 10-1/2" reel

TAPE SPEED

19 cm/s ±0.8% (7-1/2 ips.) 9.5 cm/s ± 1.0% (3-3/4 ips.) (Pitch control : ±6%) AAL Model Only

WOW & FLUTTER

Less than 0.03% WRMS, 0.08% DIN 45500 at 19 cm/s Less than 0.04% WRMS, 0.10% DIN 45500 at 9.5 cm/s

FREQUENCY RESPONSE

30 to 26,000 Hz ± 3 dB at 19 cm/s (WR Tape) 30 to 19,000 Hz ± 3 dB at 9.5 cm/s (WR Tape)

DISTORTION

Less than 0.5% (at 1,000 Hz 0VU)

SIGNAL TO NOISE RATIO

Better than 62 dB DIN 45500 at 19 cm/s

ERASE RATIO

Better than 70 dB (at 1,000 Hz)

CROSS TALK

Better than 40 dB (at 1,000 Hz)

CHANNEL SEPARATION

Better than 55 dB (at 1,000 Hz)

BIAS FREQUENCY

100 kHz

HEADS

(3): One GX recording head, One GX playback head One erase head

MOTORS

(3): One AC servo motor for capstan drive

Two AC eddy current motors for reel drive

FF.&RWD.Time

120 sec. using 550 m (1,800 ft.) Tape

OUTPUT JACKS

Line (2): 0.775 V (0VU)

Required load impedance: more than 20 kohms Phone (1): 100 mV/8 ohms

INPUT JACKS

Microphone (2): 0.25 mV

Required microphone impedance: 600 ohms Line (2): 70 mV

Input impedance 100 kohms

DIN JACK

Input: 2.0 mV

Input impedance 10 kohms Output: 0.3 V

DIMENSIONS

440(W) x 446(H) x 241(D) mm (17.4 x 17.6 x 9.5")

WEIGHT

17.6 kg (38.9 lbs)

POWER REQUIREMENT

120V, 60 Hz for USA & Canada

220/240V switchable, 50 Hz for European countries & Australia

110/120/220/240V, 50/60 Hz switchable for other countries

POWER CONSUMPTION

120W