AKAI X-300

Tape Speed

3-3/4, 7-1/2 and 15 ips optional.

Wow and Flutter

Less than 0.05% RMS at 7-1/2 ips.

Playback Only

Less than 0.085% RMS at 3-3/4 ips.

Timing Accuracy

± 0.3% at all tape speeds.

Frequency Response

30 to 24,000 cps ± 3db at 7-1/2 ips.

30 to 18,000 cps ± 3db at 3-3/4 ips.

Distortion

Within 4.0% 1,000 cps 0 VU at 10 watts. (total harmonic).

Signal to Noise Ratio

Better than 47 db.

Cross Talk

Less than -82 db (Monaural).

Less than -45 db (Stereo).

Input Level

MIC……More than 0.5 mV.

LINE……More than 50mV.

Power Output

25 watts at MUSIC POWER maximum on each channel, total 50 watts.

20 watts at UNDISTORTED POWER OUTPUT maximum on each channel. total 40 watts

Equalization

Correct equalization for playback of tapes recorded to the NAB curve.

Recording Bias Frequency

90 kc

Recording Level Indicator

VU meter x 2

Recording System

4-track stereo/monaural, CROSS-FIELD bias system

Fast Forward and Rewind Time:

45 seconds using 1,200 feet tape at 50 cycles. 36 seconds at 6O cycles.

Maximum Recording Capacity :

12 hours monaural recording at 3-3/4 ips 3,600 feet recording tape .

6 hours stereo recording at 3-3/4 ips.

Maximum Reel Size

10-1/2" reel

Head

Recording Head : 4 track stereo/monaural, low impedance 135 ohms at 1,000 cps.

Bias head : 4 track stereo, low impedance 750 ohms at 90 kc.

Playback Head : 4 track stereo/monaural, low impedance 1,000 ohms at 1,000 cps.

Erase Head : 4 track stereo, low impedance 750 ohms at 90 kc.

Motor

Hysteresis synchronous 2 speed motor for direct drive capstan.

Two 4-pole induction motors for fast forward and rewind.

Speaker

6 x4" oval, wide range speakers, one on each channel.

Transistor

Transistor x 26

Diode x 5

Rectifier x 1

Power Supply

AC 100 to 240 V, 50/60 cycles.

Power Consumption

55 VA (at non signal), to 140 VA (at maximum output).

Dimensions

1-3/8" (H) x 16-1/8" (W) x 9" (D) [ 340 (H) x 410 (W) x 230 (D) rnrn]

Weight

46.9 lbs. (21.3 kg)