AKAI GX-255

typical GX-255

Specifications

Track System	4 track 2 channel stereo/monaural system
Reel Capacity	Up to 7 inch reel
Tape Speed.	19 cm/s ±0.8% (7-1/2 ips.) 9.5 cm/s ±1.0% (3-3/4 ips.)
Wow & Flutter	Less than 0.04% W RMS, 0.10% DIN 45500 at 19 cm/s Less than 0.06% WRMS, 0.12% DIN 45500 at 9.5 cm/s
Frequency Response	30 to 24,000 Hz ±3 dB at 19 cm/s (WR tape) 30 to 19,000 Hz ±3 dB at 9.5 cm/s (WR tape)
Distortion	Less than 0.5% (at 1,000 Hz 0 VU)
Signal to Noise Ratio	Better than 61 dB DIN 45500 at 19 cm/s
Erase Ratio	Better than 70 dB (at 1,000 Hz)
Cross Talk	Better than 40 dB (at 1,000 Hz)
Channel Separation	Better than 55 dB (at 1,000 Hz)
Bias Frequency	100 kHz
Heads	(4): GX recording head; GX forward playback head; GX reverse playback head and erase head
Motors	(3): One A.C. servo motor for capstan drive; Two Eddy Current motors for reel drive
FF. & RWD. Time	75 sec. using 360m (1,200 ft.) Tape
Output Jacks	Line (2): 0.775V (0 VU) Required load impedance: more than 20 k ohms Phone (1); 100 mV/8 ohms
Input Jacks	Microphone (2); 0.25 mV Required microphone impedance: 600 ohms Line (2); 70 mV Input impedance 100 k ohms
DIN Jack	Input; 2.0 mV Input impedance 10 k ohms Output; 0.3 V
Dimensions	440(W) x 419(H) x 242(D) mm (17.3 x16.5 x9.5 in.)
Weight	16 kg (35.3 lbs.)
Power Requirement	120V 60 Hz for U.S.A. & Canada 220/240V, 50/60 Hz switchable for Europe, UK & Australia 110/120/220/240V,50/60 Hz switchable for the other countries