Teac AN-300

TEAC AN-300

A typical AN-300

Specifications:

Type	Dolby B type noise reduction system
Processor	4 processing units, switch either playback or record 4-channel operation: record or playback 2-channel operation: simultaneous record and playback
Frequency Response	20 -20,000 Hz ± 1.5 dB
Increased SN Ratio	10 dB at 10,000 Hz 5 dB at 1,000 Hz better than 6 dB overall (B weighting network)
Input Sensitivity	Tape: 0.1 V Line: 0.1 V
Input Impedance	Tape: 70,000 ohms Line: 70,000 ohms
Outputs	Rec 0.3 V for load impedance of 50,000 ohms or more Monitor 0.3 V for load impedance of 50,000 ohms or more
Harmonic Distortion	below 0.2%
Multiplex Filter	better than -35 dB at 19 KHz better than -30 dB at 38 KHz
Channel Separation	better than 55 dB
Oscillator Output Level	0.3 V
Tone Oscillator	400 Hz Dolby B type tone
Power Requirements	100/117/220/240 V AC, 50/60 Hz, 13W [US model is 117 V AC, 60 Hz only]
AC Outlet Unswitched:	500 W max.
Dimensions	6-3/4" (H) x 16-1/8"(W) x 10-1/16" (D) [ 172 (H) x 4 10 (W) x 255 (D) mm]
Weight	16-1/2 lbs [7.5 Kg], net.